Images are representations only.
FY301 Intelligent Valve Positioner
Brand: Smar International Corp
Specifications
- Travel: Linear Motion: 3 - 100 mm Rotary Motion: 30° - 120° Rotation Angle
- Input and Communication Protocol: HART, Two-Wire controlled (FY301) Fieldbus (FY302)
- Power Supply: 4 mA to 20 mA Input via controller.
- Indicator: Rotative LCD, with 4-1/2 numerical digit and 5-Character alphanumerical.
- Gauge: 0 to 160 psi scale, Acrylic display, 304 Stainless Steel connection and flexible parts in Brass.
- Hazardous Area Certifications: Explosion proof, weather proof, dust ignition proof, intrinsically safe, non-incendive according to the NEC500, CEC, CENELEC, IEC standards.
- Flow Characterization: Linear, Equal Percentage, Quick Opening, 16-pint freely configurable table.
- Temperature Limits:
- Operation: -40°C to +85°C (-40°F to +185°F)
- Storage: -40°C to +90°C (-40°F to +194°F)
- Display: -10°C to +75°C (+14°F to +167°F)
- Display: -40°C to +85°C (-40°F to +185°F) without damage
- Remote Sensor: -40°C to +105°C (-40°F to +221°F)
- Voltage Drop: 11 Vdc Max / 20 mA (equivalent to 550Ω)
- Humidity Limits: 0 - 100% RH (Relative Humidity non-condensable)
- Current: 3.8 mA (minimum)
- Position Sensor: Non-Contact Hall Effect Sensor
- Pressure Supply: 1.4 - 7 bar (20-100 psi) ANSI/ISA S7.0.01-1996
- Resolution / Repeatability: < 0.1% F.S.
- Ambient: 0.8%/20°C of span.
- Electrical Connection:
- 1/2"-14 NPT
- 3/4"-14 NPT (with 316 Stainless Steel adapter for 1/2"-14 NPT)
- 3/4"-14 BSP (with 316 Stainless Steel adapter for 1/2"-14 NPT)
- 1/2"-14 BSP (with 316 Stainless Steel adapter for 1/2"-14 NPT)
- Pneumatic Connections: Supply and output: 1/4"-18 NPT, Gauge: 1/8"-27 NPT
- Material of Construction:
- Injected low copper aluminum with polyester painting or 316 Stainless Steel housing, with Buna N O-Rings on cover (NEMA 4X, IPW 66).
Specifications
Brand
Actuator Type
- Double-Acting
- Linear
- Rotary
- Single Action
Approvals & Certifications
- CEPEL
- CRN
- CSA
- EXAM
- FM
- NEMKO ATEX
Configuration
- HART: by Digital Communication Using the Configuration Softwares CONF401, DDCON 100, FDT/DTM, AssetView or HpC401. Also Configurable Using Third-party Configuration Tools, & Can be Partially Configured through Local Adjustment Using the Smar Magenetic Too
Consumption
- 0.35 Nm³/hour (0.20 scfm) at 1.4 bar (20 psi, 140 kPa) Supply.
- 1.10 Nm³/hour (0.65 scfm) at 5.6 bar (80 psi, 560 kPa) Supply.
Current
- HART: 3.8 mA (Min.)
Display
- 4-1/2-Digit Numerical & 5-Character Alphanumerical LCD Indicator
Electrical Connectors
- 1/2” NPT
Electromagnetic Interference Effect
- According to the IEC 61326: 2002 Standard
Enclosure Finish
- Polyester (Gray Munsell N 6.5) Paint
Enclosure, Body Material
- 316 Stainless Steel
- Injected Low Copper Aluminum
Environmental Protection
- Dust Ignition-Proof
- Explosion-proof
- Intrinsically Safe
- Non-Incendive
- Weatherproof
Gauge
- For Pressure Monitoring & Output Supply. 0 to 160 psi Scale. Acrylic Display, 304 Stainless Steel Connections & Flexible Parts in Brass.
Humidity
- 0 to 100 % Relative Humidity
Input Power
- Bus Powered: 9-32 Vdc
- HART 4 mA to 20 mA Input Via Controller. Voltage Drop Equivalent to 550 ohms. Input Protected Against Reverse Polarity & Transient Suppressor.
O-Ring Material
- Buna-N
Operating Temperature - Display
- -10° to 75° C (14° to 167° F)
- -40° to 85° C (-40° to 185° F), without Damage
Process Temperature
- Operation: -40° to 85° C (-40° to 185° F)
Repeatability
- < 0.1 % of Full Scale
Resolution
- < 0.1 % of Full Scale
Storage Temperature
- -40° to 90° C (-40° to 194° F)
Supply Pressure
- 1.4 to 7 bar (20 to 100 psi, 140 to 700 kPa) Free of Oil, Dust & Water, as Pwer ANSI/ISA S7.0.01-1996
Vibration Effect
- ± 0.3 % / g of Span During the Following Conditions: 5 to 15 Hz at 4 mm Constant Displacement, 15 to 150 Hz at 2 G, 150-2000 Hz at 1 G
- Comply with the IEC 60770-1 Standard.
Voltage Drop
- 11 Vdc Max.
