PD6607-L5N

Price
Request a Quote
Stock
Call for Pricing & Availablility

  • Product Type: 1/8 DIN Loop-Powered Digital Panel Meter
  • Inputs: Current (4-20 mA)
  • Outputs: (2) Open Collectors, (2) SS Relays, (1) 4-20 mA Output
  • Display: Dual Line, 0.7" & 0.4" High, F & I and 8 Digits, LCD
  • Backlight: Standard / Red on Alarm
  • Approvals: ATEX (IS), CE, UL/C-UL, IEC (IS), UL/C-UL (IS, NI)
  • Warranty: 3 years

Specifications

Display

  • Dual-line LCD with backlight
  • Display may be programmed to turn red and flash a user-defined message on alarm condition
  • PD6606/8: Top 0.7" (17.8 mm) 5 digits
  • PD6606/8: Bottom: 0.4" (10.2 mm) 8 characters
  • PD6607: Top 0.7" (17.8 mm), 5 digits 7-segment, FT-IN & fractions
  • PD6607: Bottom: 0.4" (10.2 mm), 8 alphanumeric 14-segment characters
  • PD6608/6: Both lines 14-segment alphanumeric

Top Display

  • PD6606/8: 5 digits (-9999 to 99999) or 5 characters (all capital & most lower-case letters)
  • PD6607: FT - IN/: Automatically reducing fractions to lowest denominator
  • -99FT 11IN 15/16 to 999FT 11IN 15/16

Bottom Display

  • 8 digits (-9,999,999 to 99,999,999; separated by commas) or 8 characters (all capital & most lower-case letters)

Programming Method

  • Front panel & Free PC-based USB programming software

Enclosure & Materials

  • Enclosure: 1/8 DIN, IP65, NEMA 4X front panel, high impact plastic, NORYL® polyphenylene ether & polystyrene blend (PPE PS) resin, UL 94V-0
  • Color: gray
  • Gasket: Silicone Rubber
  • Faceplate: LEXAN® polycarbonate (PC) Film
  • Buttons: Silicone rubber

Environmental

  • Operating: -40° to 70° C
  • Storage: -40 to 85°C (-40 to 185°F)
  • Relative humidity: 0 to 90% non-condensin
  • Printed circuit boards are conformally coated

Noise Filter

  • 0.0 to 99.9% of full scale. Input signal changes greater than bypass value are displayed immediately

Filter Bypass

  • 0 to 90 % Non-condensing
  • Printed circuit boards are conformally coated

Normal Mode Rejection

  • 64 dB at 50/60 Hz

Connections

  • Removable screw terminals accept 12 to 22 AWG wire

Tightening Torque

  • Screw terminal connectors: 4.5 lb-in (0.5 Nm)
  • Mounting screws: 8.0 lb-in max. (0.9 Nm)

Overall Dimensions (W x H x D)

  • 4.68" x 2.45" x 3.79" (119 mm x 62 mm x 96 mm)

Weight

  • 8.7 oz. / 247 g with option board

Hazardous Area Approvals

  • ATEX: II 1G, Ex ia IIC T4 Ga, Ta = -40° to +70° C Certificate Number: CML 17ATEX2015X
  • IECEx: Ex ia IIC T4 Ga, Tamb = -40° to +70° C Certificate Number: IECEx CML 17.0008X
  • UL & C-UL
  • IEC 61010-1
show more