PD8-6210 ProtEX-MAX Explosion-Proof Analog Input Batch Controller

The ProtEX-MAX PD8-6210 is an explosion-proof analog input batch controller ideal for simplifying independent batch control operations where local control is preferred to expensive and expansive plant operation systems.

The controller features a dual-line display, with a main display 0.60" (15 mm) high, and a second display of 0.46" (12 mm) high superluminous LED digits, which can be read in any lighting condition, including direct sunlight.

The controller is housed in a field-mountable, NEMA 4X/IP68 rated enclosure available in either aluminum or stainless steel for convenient indoor and outdoor installation.

The controller comes programmed for easy start, pause, stop, and batch size (preset) changes. The second display can be programmed to display rate, grand total, batch count, or preset by cycling the Stop (F3) button. Digital inputs come standard.

Single and multi-stage batching is possible with four (4) on-board relays. Each batch control relay may have a unique preclose amount when used for multi-stage batching. Manual start batching is default, but automatic batching with a restart after a programmed time delay from the completion of the last batch is also possible.

Overrun correction adjusts the closing of the batch control relays to adjust for inaccuracies from batch to batch. This increases accuracy over time as systems wear out. The overrun correction feature is capable of compensating for inaccuracies of up to 1% of the programmed preset value.

The controller accepts current and voltage signals (e.g. 4-20 mA, 0-10 V). The PD8-6210 batch controller comes with four SPDT relays, a 4-20 mA output, two 24 VDC power supplies, five digital inputs and four digital outputs, and RS-485 serial communications, making it an excellent addition to any system.

• Fully Approved Explosion-Proof Batch Controllers
• 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs with ±0.03% Accuracy
• Dual-Line 6-Digit Display, 0.6" (15 mm) & 0.46" (12 mm)
• SafeTouch Through-Glass Button Programming
• Display Mountable at 0°, 90°, 180°, & 270°
• Isolated 24 VDC @ 25 mA Transmitter Power Supply
• Easy Field Scaling in Engineering Units without Applying an Input
• 4 Relays with Interlocking Capability + Isolated 4-20 mA Output
• Free PC-Based, On-Board, MeterView Pro USB Programming Software
• SunBright Display Standard Feature; Great for Outdoor Applications
• Start / Pause / Stop, Change Batch with Front Panel Buttons
• Display Batch Total, Rate, Grand Total, Count or Preset
• Single or Multi-Stage Batch Control (Up to 4 Relays)
• Front Panel or Remote Total Reset
• Automatic Overrun Correction
• Automatic or Manual Batch Control
• Low or High Flow Alarms while Batching
• 32-Point Linearization, Square Root Extraction and Programmable Exponent Function
• Operating Temperature Range: -55 to 65°C (-67 to 149°F)
• CSA Certified as Explosion-Proof / Dust-Ignition-Proof / Flame-Proof
• ATEX and IECEx Certified as Flame-Proof
• Input Power Options: 85-265 VAC / 90-265 VDC or 12-24 VDC / 12-24 VAC
• Programmable Display, Function Keys & Digital Inputs
• Flanges for Wall or Pipe Mounting
• Explosion-Proof Aluminum or Stainless Steel NEMA 4X / IP68 Enclosures
• On-Board RS-485 Serial Communications
• Modbus RTU Communication Protocol Standard
• Password Protection
• Four 3/4" NPT Threaded Conduit Openings
• 3-Year Warranty